Case 1488
- CASE EXCAVATOR - DITCH CLEANING BUCKET (1/97-12/01)
- CASE EXCAVATOR - QUICK COUPLER (1/97-12/01)
- CASE EXCAVATOR - CAB HEADLIGHT PROTECTION (1/97-12/01)
- CASE EXCAVATOR - HANDLING ATTACHMENT (1/97-12/01)
- No Description
- HANDLING BOOM (6.00M), 1488
- HYDRAULIC CIRCUIT - HANDLING BOOM (6.00M), 1488
- CLAMSHELL SWING FEED - HANDLING BOOM (6.00M), 1488
- LUBRICATION CIRCUIT - HANDLING BOOM (6.00M), 1488
- HANDLING DIPPER (3.00M), 1488
- HYDRAULIC CIRCUIT - DIPPER HANDLING (3.00M)
- CLAMSHELL SWING FEED - DIPPER HANDLING (3.00M), 1488
- LUBRICATION CIRCUIT - DIPPER HANDLING (3.00M), 1488
- DIPPER CYLINDER CIRCUIT, 1488
- DIPPER CYLINDER, 1488
- DIPPER CYLINDER CIRCUIT - SAFETY DEVICE, 1488
- SAFETY VALVE
- No Description
- CASE EXCAVATOR - LOW FLOW CONTROL VALVE (1/97-12/01)
- CASE CRAWLER EXCAVATOR - RAISED CAB (1/97-12/01)
- No Description
- FUEL FILLING, 1488C
- STARTING SYSTEM, 1488C
- OVERLOAD INDICATOR, 1488C
- ELECTRICAL CIRCUIT, FUEL HEATER, 1488C
- UNDERCARRIAGE, 1488C
- FIXED RISER (2.00M), 1488C
- FIXED RISER (3.00M), 1488C
- PILOT CIRCUIT - CONTROL VALVE, ATTACHMENT, 1488C, RISER : 2.00 M
- PILOT CIRCUIT - CONTROL VALVE, ATTACHMENT, 1488C, RISER : 3.00 M
- HYDRAULIC SWING AND HYDRAULIC HAMMER CIRCUIT, 1488C
- HYDRAULIC CIRCUIT - ENGINE MODULE, 1488LC CGG0214501- / 1488NLC CGG0225001-
- VALVE SUPPORT HYDRAULIC CIRCUIT - FIXED RISER (2.00M)
- VALVE SUPPORT HYDRAULIC CIRCUIT - FIXED RISER (3.00M)
- HYDRAULIC CIRCUIT - VALVE BANK PARTITION, 1488LC CGG0214501-/ 1488NLC CGG0225001-
- VALVE SUPPORT HYDRAULIC CIRCUIT - FIXED RISER (2.00M), 1488LC CGG0214501-/ 1488NLC CGG0225001-
- VALVE SUPPORT HYDRAULIC CIRCUIT - FIXED RISER (3.00M), 1488LC CGG0214501-/ 1488NLC CGG0225001-
- CIRCUIT - OPERATORS COMPARTMENT, 1488LC CGG0214501- / 1488NLC CGG0225001-
- HEATING CIRCUIT - FIXED RISER (2.00M), 1488C
- HEATING CIRCUIT - FIXED RISER (3.00M), 1488C
- No Description
- CASE EXCAVATOR - TACHOMETER (1/97-12/01)
- CASE EXCAVATOR - CAB GUARD (1/97-12/01)
- CASE HYDRAULIC EXCAVATOR CLAMSHELLS (1/97-12/01)
- No Description
- PARTS CATALOG
- EARTHMOVING CLAMSHELL (500L)
- EARTHMOVING CLAMSHELL (650L)
- EARTHMOVING CLAMSHELL (850L)
- TRENCHING CLAMSHELL (0.55M)
- HANDLING CLAMSHELL (1000L)
- HANDLING CLAMSHELL (1250L)
- BORING CLAMSHELL (1.18M)
- FIVE TINE GRAB - STONE
- FIVE TINE GRAB - SCRAP
- CIRCUIT - FIVE TINES GRAB
- CLAMSHELL CYLINDER
- CLAMSHELL CYLINDER
- FIVE TINE GRAB CYLINDER - STONE
- FIVE TINE GRAB CYLINDER - SCRAP
- TURNING JOINT
- TURNING JOINT - HYDRAULIC SWING
- HYDRAULIC SWING MOTOR(315CM³)
- SAFETY VALVE - HYDRAULIC SWING
- No Description
- CASE EXCAVATOR - PANORAMIC CAB ROOF (1/97-12/01)
- CASE EXCAVATOR - DEMOLITION ATTACHMENT (1/97-12/01)
- 18 MISCELLANEOUS
- INSTRUMENT PANEL
- ELECTRICAL CIRCUIT OPTIONAL, CONTROL, HYDRAULIC AND ELECTRIC
- UPPERSTRUCTURE CHASSIS (-XXXXX)
- UPPERSTRUCTURE CHASSIS (XXXXX-)
- COUNTERWEIGHT
- VALVE BANK PARTITION
- HYDRAULIC CIRCUIT ENGINE MODULE
- HYDRAULIC CIRCUIT VALVE BANK PARTITION
- HYDRAULIC CIRCUIT VALVE BANK PARTITION
- HYDRAULIC CIRCUIT OPERATORS COMPARTMENT 1488LC CCGG0214501-CGG0214731 / 1488NLC CGG0225001-0225108
- HYDRAULIC CIRCUIT ATTACHMENT CONTROL VALVE PILOT 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- OPERATORS COMPARTMENT
- HEATING CIRCUIT
- HYDRAULIC CIRCUIT TILTING CAB
- CONTROL VALVE OPTIONAL
- SELECTOR
- LIFT CYLINDER TILTING CAB
- HYDRAULIC CIRCUIT DEMOLITION 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- HYDRAULIC CIRCUIT, HIGH FLOW UPPERSTRUCTURE CHASSIS 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- HYDRAULIC CIRCUIT, HIGH FLOW UPPERSTRUCTURE CHASSIS 1488LC CGG0214732- / 1488NLC CGG0225109-
- CONTROL VALVE HIGH FLOW
- HYDRAULIC CIRCUIT DEMOLITION 1488LC CGG0214732- /1488NLC CGG0225109-
- HYDRAULIC CIRCUIT DEMOLITION
- HYDRAULIC CIRCUIT DEMOLITION
- HYDRAULIC CIRCUIT OPERATORS COMPARTMENT 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- HYDRAULIC CIRCUIT OPERATORS COMPARTMENT 1488LC CGG0214732-/ 1488NLC CGG0225109-
- CONTROL VALVE OPTIONAL
- CONTROL VALVE OPTION SECTION 60L/MN
- CONTROL VALVE OPTION SECTION 30L/MN
- PILOT CIRCUIT CONTROL VALVE, ATTACHMENT 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- PILOT CIRCUIT CONTROL VALVE, ATTACHMENT 1488LC CGG0214732- / 1488NLC CGG0225109-
- PILOT CIRCUIT CONTROL VALVE, ATTACHMENT 1488LC CGG0214733- / 1488NLC CGG0225110-
- HYDRAULIC CIRCUIT DEMOLITION 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- HYDRAULIC CIRCUIT DEMOLITION 1488LC CGG0214732- / 1488NLC CGG0225109-
- BOOM CYLINDER CIRCUIT
- BOOM CYLINDER CIRCUIT SAFETY DEVICE 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- SAFETY VALVE CIRCUIT BOOM CYLINDER 1488LC CGG0214732- / 1488NLC CGG0225109-
- SAFETY VALVE BOOM
- BOOM CYLINDER
- HANDLING BOOM 8.70M
- HYDRAULIC CIRCUIT HANDLING BOOM 8.70M
- HYDRAULIC CIRCUIT, HIGH FLOW HANDLING BOOM 8.70M
- CLAMSHELL SWING CIRCUIT HANDLING BOOM 8.70M
- LUBRICATION CIRCUIT HANDLING BOOM 8.70M
- BOOM 9.80 M - 385-7/8 IN
- HYDRAULIC CIRCUIT BOOM 9.80 M - 385-7/8 IN
- HYDRAULIC CIRCUIT BOOM 9.80 M - 385-7/8 IN
- LUBRICATION CIRCUIT BOOM 9.80 M - 385-7/8 IN
- PRE-BOOM 3.20 M - 126 IN
- HYDRAULIC CIRCUIT PRE-BOOM 3.20 M - 126 IN 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- HYDRAULIC CIRCUIT PRE-BOOM 3.20 M - 126 IN 1488LC CGG0214732- / 1488NLC CGG0225109-
- HYDRAULIC CIRCUIT PRE-BOOM 3.20 M - 126 IN 1488LC CGG0214501-CGG0214731 / !488NLC CGG0225001-CGG0225108
- HYDRAULIC CIRCUIT PRE-BOOM 3.20 M - 126 IN 1488LC CGG0214732- / !488NLC CGG0225109-
- HYDRAULIC CIRCUIT PRE-BOOM 3.20 M - 126 IN 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- HYDRAULIC CIRCUIT PRE-BOOM 3.20 M - 126 IN 1488LC CGG0214732- / 1488NLC CGG0225109-
- HYDRAULIC CIRCUIT PRE-BOOM 3.20 M - 126 IN 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- HYDRAULIC CIRCUIT PRE-BOOM 3.20 M - 126 IN 1488LC CGG0214732- / 1488NLC CGG0225109-
- LUBRICATION CIRCUIT PRE-BOOM 3.20 M - 126 IN
- BOOM EXTENSION 4.20 M - 165-3/8 IN 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- BOOM EXTENSION 4.20 M - 165-3/8 IN 1488LC CGG0214732- / 1488NLC CGG0225109-
- BOOM HYDRAULIC CIRCUIT EXTENSION 4.20 M - 165-3/8 IN
- BOOM HYDRAULIC CIRCUIT EXTENSION 4.20 M - 165-3/8 IN 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- BOOM HYDRAULIC CIRCUIT EXTENSION 4.20 M - 165-3/8 IN 1488LC CGG0214732- / 1488NLC CGG0225109-
- BOOM HYDRAULIC CIRCUIT EXTENSION 4.20 M - 165-3/8 IN
- LUBRICATION CIRCUIT, BOOM EXTENSION 4.20 M - 165-3/8 IN
- BOOM EXTENSION 6.60 M - 259-7/8 IN
- BOOM HYDRAULIC CIRCUIT EXTENSION 6.60 M - 259-7/8 IN
- BOOM HYDRAULIC CIRCUIT EXTENSION 6.60 M - 259-7/8 IN
- LUBRICATION CIRCUIT, BOOM EXTENSION 6.60 M - 259-7/8 IN
- INTERMEDIATE DIPPER 2.40 M - 94-1/2 IN
- HYDRAULIC CIRCUIT INTERMEDIATE DIPPER
- LUBRICATION CIRCUIT INTERMEDIATE DIPPER (-XXXXX)
- LUBRICATION CIRCUIT INTERMEDIATE DIPPER (XXXXX-)
- DIPPER 6.70 M - 263-7/8 IN (-XXXXX)
- HYDRAULIC CIRCUIT DIPPER 6.70 M - 263-7/8 IN (-XXXXX)
- DIPPER 6.70 M - 263-7/8 IN (XXXXX-)
- HYDRAULIC CIRCUIT DIPPER 6.70 M - 263-7/8 IN (XXXXX-)
- DIPPER 5.50 M - 216-5/8 IN
- HYDRAULIC CIRCUIT DIPPER 5.50 M - 216-5/8 IN
- ELECTRIC CIRCUIT, ATTACHMENT
- INTERMEDIATE DIPPER CYLINDER CIRCUIT 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- DIPPER CYLINDER CIRCUIT
- DIPPER CYLINDER CIRCUIT 1488LC CGG0214501-CGG0214731 / 1488NLC CGG0225001-CGG0225108
- DIPPER CYLINDER (-XXXXX)
- DIPPER CYLINDER (XXXXX-)
- SAFETY VALVE DIPPER
- SAFETY VALVE DIPPER
- INTERMEDIATE DIPPER CYLINDER
- JAW CONTROL
- CYLINDER CIRCUIT JAW CONTROL
- JAW CONTROL CYLINDER
- BUCKET CONTROL DIPPER 5.50 M - 216-5/8 IN
- BUCKET CYLINDER CIRCUIT DIPPER 5.50 M - 216-5/8 IN
- BUCKET CYLINDER DIPPER 5.50 M - 216-5/8 IN
- BUCKET CONTROL DIPPER 6.70 M - 263-7/8 IN
- BUCKET CYLINDER CIRCUIT DIPPER 6.70 M - 263-7/8 IN (XXXXX-)
- BUCKET CYLINDER DIPPER 6.70 M - 263-7/8 IN
- CONTROL BLOCK ATTACHMENT
- SELECTION SHUTOFF
- FAST COUPLER CLAMSHELL FEED
- DECALS
- DECALS
- UPPERSTRUCTURE GUARD
- UPPERSTRUCTURE LOWER PANELS
- UPPERSTRUCTURE LOWER PANELS
- CAB GUARD
- COOLER GRATING
- BUCKET CYLINDER PROTECTION DIPPER 5.50m
- GUARD STONE
- MOUNTING ATTACHMENT
- CAB, POLYCARBONATE WINDOW GLASSES EMERGENCY EXIT
- 18 MISCELLANEOUS
- CASE EXCAVATOR - COMFORT SERIES - 88 RANGE (1/97-12/01)
- CASE CRAWLER EXCAVATOR - HAND CONTROL VALVE (EC2000 4 SWITCHES) (1/97-12/01)
- CASE EXCAVATOR - PNEUMATIC SEAT (1/97-12/01)
- CASE EXCAVATOR - FLOATING BOOM CIRCUIT (1/97-12/01)
- CASE CRAWLER EXCAVATOR - CAB ELEVATOR (1/97-12/01)
- No Description
- CAB ELEVATOR CONTROLS
- ELECTRICAL CIRCUIT, CAB ELEVATOR CONTROLS
- STARTING SYSTEM
- ELECTRICAL CIRCUIT, ENGINE MODULE
- SERVICE BRAKE
- ELECTRICAL CIRCUIT, OVERLOAD INDICATOR
- ELECTRICAL CIRCUIT, ENGINE MODULE
- EMERGENCY SYSTEM, ELECTRIC
- ELECTRICAL CIRCUIT, EMERGENCY SYSTEM
- HYDRAULIC CIRCUIT
- ELECTRICALLY CONTROLLED SELECTOR
- ELECTRICALLY CONTROLLED SELECTOR
- EMERGENCY SYSTEM, HYDRAULIC
- HYDRAULIC CIRCUIT, OPERATORS COMPARTMENT
- HYDRAULIC CIRCUIT, OPERATORS COMPARTMENT
- HYDRAULIC CIRCUIT, OPERATORS COMPARTMENT
- FOOT CONTROLLED OPTION
- BRAKE CIRCUIT, ITALY AND GERMANY
- CONTROL VALVE, OPTIONAL, 2 SECTIONS
- ELEVATOR CYLINDER
- CAB ELEVATOR
- ENGINE THROTTLE CONTROL
- CAB SURROUNDINGS
- CAB ACCESS
- HEATING CIRCUIT
- ENGINE COMPARTMENT LIGHT
- CAB ELEVATOR CONTROLS
- ELECTRICAL CIRCUIT, CAB ELEVATOR CONTROLS, UP TO XXXXX
- ELECTRICAL CIRCUIT, CAB ELEVATOR CONTROLS, XXXXX AND AFTER
- ELECTRONIC CIRCUIT, VALVE BANK PARTITION
- ENGINE ELECTRIC CIRCUIT
- ELECTRONIC CIRCUIT
- FUEL FILLING
- STARTING SYSTEM
- ELECTRICAL CIRCUIT, FUEL HEATER
- OVERLOAD INDICATOR, SEE : N.I.T. 3245
- OVERLOAD INDICATOR, SAFETY VALVE, SEE : N.I.T. 3245
- ENGINE MODULE
- EMERGENCY SYSTEM, ELECTRIC
- ELECTRICAL CIRCUIT, EMERGENCY SYSTEM
- HYDRAULIC CIRCUIT, ELEVATOR CYLINDER
- EMERGENCY SYSTEM, HYDRAULIC
- HYDRAULIC CIRCUIT, VALVE BANK PARTITION
- PILOT CIRCUIT, CONTROL VALVE, ATTACHMENT
- CIRCUIT, OPERATORS COMPARTMENT
- HYDRAULIC CIRCUIT, VALVE BANK PARTITION
- HYDRAULIC CIRCUIT, VALVE BANK PARTITION
- HYDRAULIC SWING AND HYDRAULIC HAMMER CIRCUIT
- HYDRAULIC CIRCUIT, PICK HAMMER
- CLAMSHELL SWING FEED
- ELECTRICALLY CONTROLLED SELECTOR
- ELECTRICALLY CONTROLLED SELECTOR
- CONTROL VALVE, OPTIONAL, 2 SECTIONS
- CONTROL VALVE, OPTION SECTION
- SELECTOR BLOCK SUPPORT
- CAB SURROUNDINGS
- CAB ELEVATOR
- CAB ACCESS
- OPERATORS COMPARTMENT, ELECTRIC SAFETY DEVICE
- ELEVATOR CYLINDER
- HEATING CIRCUIT
- No Description
What feature would you like to see on the 777parts next?
VALVE SUPPORT HYDRAULIC CIRCUIT - FIXED RISER (3.00M)
CRAWLER EXCAVATORS Case 1488
CASE CRAWLER EXCAVATOR - RAISED CAB (1/97-12/01) / No Description / VALVE SUPPORT HYDRAULIC CIRCUIT - FIXED RISER (3.00M)
Parts scheme
Subscribe to get access to the part numbers and schemes.
Unlock Access
List of spare parts
Subscribe to get access to the part numbers and schemes.
Unlock Access| # | Part No | Part Name | Qty. |
|---|---|---|---|
| 1 | REF | INSTRUCTION | 1 |
| 2 | REF | INSTRUCTION | 1 |
| 3 | REF | INSTRUCTION | 1 |
| 4 | X7***73 | HOSE | 1 |
| 5 | J6***66 | HOSE | 1 |
| 6 | A5***99 | HOSE | 1 |
| 7 | R5***06 | SHIN | 2 |
| 8 | 61***80 | BOLT,Hex, M10 x 1.5 x 80mm, Cl 8.8, Full Thd | 4 |
| 9 | W3***03 | WASHER | 12 |
| 10 | G3***98 | SAFETY NUT | 8 |
| 11 | Q5***93 | HOSE,25.4mm ID x 1460mm L | 1 |
| 12 | C4***66 | CLAMP | 28 |
| 13 | 14***31 | HEX SOC SCREW,M10 x 1.5 x 35mm, Cl 10.9, Full Thd | 56 |
| 14 | L1***83 | O-RING | 14 |
| 15 | W5***76 | HOSE | 2 |
| 16 | C5***31 | SHIN | 2 |
| 17 | D4***67 | SHIN | 44 |
| 18 | J5***18 | SCREW,Hex Skt, M12 x 40mm, Cl 10.9 | 82 |
| 19 | D3***21 | O-RING,0.139" Thk x 1.296" ID, -219, Cl 6, 90 Duro | 22 |
| 20 | P7***04 | HOSE | 2 |
| 21 | X7***84 | HOSE | 1 |
| 21A | X7***84 | HOSE | 1 |
| 22 | E6***89 | HOSE | 1 |
| 22A | E6***89 | HOSE | 1 |
| 23 | Z8***98 | HOSE | 2 |
| 24 | REF | INSTRUCTION | 1 |
| 25 | S1***71 | PROTECTOR | |
| 26 | S1***71 | PROTECTOR | |
| 26A | S1***71 | PROTECTOR | |
| 27 | S1***71 | PROTECTOR | |
| 27A | S1***71 | PROTECTOR | |
| 28 | Q3***20 | WASHER | 10 |
| 29 | Q7***08 | HOSE | 1 |
| 30 | R2***18 | FITTING | 1 |
| S3***12 | O-RING,0.07" Thk x 0.301" ID, -11, Cl 6, 90 Duro | 1 | |
| 31 | G8***82 | HOSE | 2 |
| 32 | B1***63 | TEE | 1 |
| S3***12 | O-RING,0.07" Thk x 0.301" ID, -11, Cl 6, 90 Duro | 3 | |
| 33 | L5***85 | FITTING | 1 |
| R7***42 | GASKET | 1 | |
| 34 | K7***50 | HOSE | 1 |
| 35 | C4***69 | FITTING | 2 |
| R7***42 | GASKET | 1 | |
| 36 | G7***47 | HOSE | 1 |
| 37 | Q5***28 | SHIN | 5 |
| 38 | 38***45 | BOLT,Hex, M8 x 1.25 x 45mm, Cl 8.8 | 10 |
| 39 | A1***96 | SAFETY NUT | 10 |
| 40 | H2***13 | PLUG | 1 |
| G1***68 | GASKET | 1 | |
| 41 | A3***49 | HYD CONNECTOR | 1 |
| R7***42 | GASKET | 1 | |
| 42 | REF | INSTRUCTION | 1 |
| 43 | Q3***96 | SCREW | 6 |
| 44 | REF | INSTRUCTION | 1 |
| 45 | 98***23 | BOLT,Hex, M20 x 2.5 x 50mm, Cl 8.8, Full Thd | 2 |
| 46 | H5***89 | WASHER | 2 |
| 47 | L5***20 | SHIN | 2 |
| 48 | 81***85 | BOLT,Hex, M10 x 1.5 x 85mm, Cl 8.8 | 6 |
| 49 | K5***19 | SHIN | 2 |
| 50 | REF | INSTRUCTION | 1 |
| 51 | W3***95 | WASHER | 2 |
| 52 | REF | INSTRUCTION | 1 |
| 53 | S1***71 | PROTECTOR | |
| 54 | R7***09 | HOSE | 1 |
| 55 | A7***86 | HOSE | 2 |
| 56 | T8***05 | HOSE | 2 |
| 57 | Q5***20 | FITTING | 2 |
| 58 | E7***45 | HOSE | 1 |
