777parts.net — оn-line catalog of spare parts for CATERPILLAR, KOMATSU, HITACHI, JOHN DEERE, TADANO, JCB, VOLVO, DOOSAN, HYUNDAI machinery
Attention!
You must be subscriber to view full schemes and spare parts numbers.

Caterpillar 75D

What feature would you like to see on the 777parts next?

1255482 WIRING GROUP-MACHINE

CHALLENGER Caterpillar 75D
Challenger 75D Agricultural Tractor 5AR00001-UP (MACHINE) POWERED BY 3176C Engine ELECTRICAL AND STARTING SYSTEM
1255482 WIRING GROUP-MACHINE

125-5482 WIRING GP-MACHINE
S/N 5AR436-99999
PART OF 113-7279 CHASSIS AR

Parts scheme

Subscribe to get access to the part numbers and schemes.

Unlock Access
Parts scheme 1255482 WIRING GROUP-MACHINE   - CHALLENGER Caterpillar 75D - Challenger 75D Agricultural Tractor 5AR00001-UP (MACHINE) POWERED BY 3176C Engine ELECTRICAL AND STARTING SYSTEM | 777parts

Aggregate

Part NoPart NamePrice request
1255482WIRING GROUP-MACHINE  

List of spare parts

Subscribe to get access to the part numbers and schemes.

Unlock Access
#Part NoPart NameQty.
18K***33GROMMET WIRES TO PLATE GROMMET-WIRES TO PLATE2
25L***07SCREW-MACHINE (10-32X0.875-IN)(ROUND HEAD)4
33W***46SPACER 2
48T***64BOLT (1/4-20X0.625IN) (1/4-20X0.625-IN)4
8T***05WASHER, FLAT-THIN(1/4) w/o Freespool Qty is 124
511***03WIRE AS 1
65P***67CAPSCREW, HEX HEAD (3/8 NC X 5/8) 1
75P***64GROMMET 3
85S***79HEX HEAD CAPSCREW, 3/8 NC x 7/8 in. (22 mm) 5
98T***96WASHER-HARD- LINE FROM PIPE AS. TO GEAR 12
104K***64CLIP-- LOCK LINE TO HITCH (14.2MM ID)(CIRCULAR)4
1111***80SWITCH GROUP-MAGNETIC (START RELAY)1
10***02KIT-RECEPTACLE (2-PIN)(ENGINE SENSOR WIRING HARNESS)1
(INCLUDES RECEPTACLE AS & WEDGE)
3E***65WEDGE (RECEPTACLE LOCK) (2 PIN)1
5C***90NUT (M6X1-THD)(AIR INLET HEATER)2
8T***29PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR)2
9X***86SLEEVE (BULK) (15 CM)
129X***53SWITCH AS-MAGNETIC (USER POWER RELAY)1
4F***94NUT (JAM) (5/16-24 THD)2
6V***86NUT (5/16-24) w/o Freespool Qty is 02
6V***78NUT (10-32-THD)2
133K***60SEAL PILOT MANIFOLD ON SEAL TO BOOM CHECK VALVE DRAIN1
144L***54CAPSCREW (3/8-16X21 IN) (GD8) (HEX HD) (4-ROLLER)2
1510***27SENDER AS-TEMPERATURE SWITCH (HYDRAULIC OIL)1
8T***29PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR)2
10***02KIT-RECEPTACLE (2-PIN)(ENGINE SENSOR WIRING HARNESS)1
(INCLUDES RECEPTACLE AS & WEDGE)
1612***08CIRCUIT BREAKER AS (150-AMPERE)(150 AMP)1
1H***44LOCKWASHER (BRACKET TO CAB) 2
8T***05WASHER, FLAT-THIN(1/4) w/o Freespool Qty is 122
7X***82BOLT (1/4-28X0.5-IN)2
170S***70CAP SCREW (5/8" LONG) 1
183E***94CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR)1
1H***44LOCKWASHER (BRACKET TO CAB) 2
6V***87NUT (1/4 X 28 THD) 2
8T***05WASHER, FLAT-THIN(1/4) w/o Freespool Qty is 122
199U***79HARNESS AS-SENSOR (FUEL, HYDRAULIC)1
204F***11PLUG 3.5 cm(1.37 in.) hole PLUG-- TO SUPPORT ASSEMBLY2
215P***76WASHER guard to support assembly and guard assembly 2
3J***18LOCKWASHER, SHAKEPROOF - 1/2 2
226V***88NUT-FULL (1/2-13 THD) (1/2-13-THD)(FULL)3
236Y***84STRAP AS-GROUND 1
243T***47CLIP AS-TO HARNESS CONNECTORS IF 9G9154 2
256V***55SENSOR ASSEM. (ENGINE & TRANSMISSION SPEED) 1
10***02KIT-RECEPTACLE (2-PIN)(ENGINE SENSOR WIRING HARNESS)1
(INCLUDES RECEPTACLE AS & WEDGE)
3E***65WEDGE (RECEPTACLE LOCK) (2 PIN)1
8T***29PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR)2
9X***86SLEEVE (BULK) (15 CM)
265P***85CLIP (7.94MM ID)2
277C***54CLIP-(SLOT TO FIT FASTENER M10 OR 3/8) 2
286V***01NUT (3/8-16-THD)(PLATE TO RH AND LH BRACKET AS)3
292V***87BRACKET 1
309R***14COVER 1
313S***93STRAP-CABLE-TO TIE HARNESSES TOGETHER 26
324P***29CLIP (26.5MM ID) (26.5 MM ID)6
337K***81STRAP-PRESSURE & RETURN HOSES TO 4
348M***70CLIP .5 in. (1.27 cm) I.D. hole 2
358M***73CLIP (17.46MM ID)(HOSE AS TO MAG DRIVE HOUSING)6
368T***01CAPSCREW (HEX HD.) (3/8-16 X 2 IN, GD8, Z)1
372M***02SPACER 1
387T***35HORN AS (12-VOLT)1
8C***81SCREW (MACHINE) (M4X0.70X8MM)2
9B***33LOCKWASHER (INT'L TOOTH)2
3912***82HARNESS AS (BUFFER)1
409U***72WIRE AS 1
4112***67HARNESS AS (CHASSIS)1
424M***25B. 5/16 N.C. x 1" 2
8T***24WASHER-TO ASSEMBLE VALVE AS AND PLATES 2
433J***07SEAL VALVE ASSEMBLY TO SEAL- TUBE ASSEMBLY TO LOGIC VALVE1
445P***01ADAPTER TRAVEL ALARM SWITCH TO SPEED 1
455P***22TEE-PIPE 1
4611***63SENDER AS-PRESSURE (ENGINE OIL)1
4B***49NUT-VALVE TO BRACKET 3.18MM(.125IN)THK1
8F***34LOCKWASHER (EXTERNAL TEETH)1
4710***80SWITCH AS-PRESSURE (ENGINE OIL)1
10***02KIT-RECEPTACLE (2-PIN)(ENGINE SENSOR WIRING HARNESS)1
(INCLUDES RECEPTACLE AS & WEDGE)
3E***65WEDGE (RECEPTACLE LOCK) (2 PIN)1
8T***29PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR)2
484M***17BUSHING-REDUCING (FOR USE WITH TA EXHAUST MAN.)1
495P***16WASHER (HARD) (8.8X20.5X2mm THK)1
5012***80HARNESS AS (LH FENDER)1
513S***93STRAP-CABLE-TO TIE HARNESSES TOGETHER 55
522V***59GROMMET 2
535S***79HEX HEAD CAPSCREW, 3/8 NC x 7/8 in. (22 mm) 2
548T***96WASHER-HARD- LINE FROM PIPE AS. TO GEAR 7
559U***41ROD 1
568T***37PLUG-SEAL (40 PIN CONNECTOR)4
10***09KIT-CONNECTING PLUG (4-PIN)(SENSOR WIRING HARNESS)1
(INCLUDES PLUG AS & WEDGE)
579U***01HARNESS AS (STEERING TO CIRCUIT BREAKER)1
5814***11HARNESS AS-ENGINE 1
592V***60GROMMET 2
604L***54CAPSCREW (3/8-16X21 IN) (GD8) (HEX HD) (4-ROLLER)1
6110***78CONTROL GROUP-ELECTRONIC 1
624P***29CLIP (26.5MM ID) (26.5 MM ID)3
6312***83HARNESS AS (HEAD & FLOOD LAMP)1
645P***67CAPSCREW, HEX HEAD (3/8 NC X 5/8) 1
653E***04SWITCH GROUP-TEMPERATURE (HYDRAULIC OIL)1
10***02KIT-RECEPTACLE (2-PIN)(ENGINE SENSOR WIRING HARNESS)1
(INCLUDES RECEPTACLE AS & WEDGE)
3E***65WEDGE (RECEPTACLE LOCK) (2 PIN)1
8T***29PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR)2
663K***60SEAL PILOT MANIFOLD ON SEAL TO BOOM CHECK VALVE DRAIN1
677K***81STRAP-PRESSURE & RETURN HOSES TO 25
689U***40ROD 1
694K***88TUBE 2
707X***91BOLT-PLT (3/8UNC X 3 3/4)2
7112***81HARNESS AS (RH FENDER)1
725P***39GROMMET 2
733J***07SEAL VALVE ASSEMBLY TO SEAL- TUBE ASSEMBLY TO LOGIC VALVE1
748M***73CLIP (17.46MM ID)(HOSE AS TO MAG DRIVE HOUSING)2
753E***74SWITCH AS-PRESSURE (DIFFERENTIAL LUBE)1
10***03KIT (RECEPTACLE) (3-PIN) (INCLUDES RECEPTACLE AS & WEDGE)1
(INCLUDES RECEPTACLE AS & WEDGE)
3E***71WEDGE (RECEPTACLE LOCK) (3 PIN)1
8T***29PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR)3
768T***01CAPSCREW (HEX HD.) (3/8-16 X 2 IN, GD8, Z)1
778T***96WASHER-HARD- LINE FROM PIPE AS. TO GEAR 1
782M***02SPACER 1
794K***02CLIP (15.88MM ID) 1
808T***84BOLT-PLT (1/2UNC X 7/8)1
818T***23WASHER-HARD (13.5X25.5X3-MM THK)(BOLT TO SHIELD)3
823E***25SWITCH AS-TEMPERATURE (ETHER AID ARMING)1
10***02KIT-RECEPTACLE (2-PIN)(ENGINE SENSOR WIRING HARNESS)1
(INCLUDES RECEPTACLE AS & WEDGE)
3E***65WEDGE (RECEPTACLE LOCK) (2 PIN)1
8T***29PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR)2
833B***55BUSHING TO DELIVERY PORTS 1
844P***29CLIP (26.5MM ID) (26.5 MM ID)7
853S***93STRAP-CABLE-TO TIE HARNESSES TOGETHER 10
865P***15WASHER-MOUNT 9W3075 FUEL LEVEL SENSOR 4
872W***99BOLT (M6X1X40-MM)1
888M***70CLIP .5 in. (1.27 cm) I.D. hole 1
8911***94SENDER AS-TEMPERATURE SWITCH (ENG' COOLANT)1
8T***29PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR)2
10***02KIT-RECEPTACLE (2-PIN)(ENGINE SENSOR WIRING HARNESS)1
(INCLUDES RECEPTACLE AS & WEDGE)
9013***56SENSOR GROUP-ARC SUPPRESSOR 1
913T***48CLIP ASSEMBLY - HOUSING PLUG TO HOUSING RECP. 1
9212***61CABLE AS (ALTERNATOR/BATTERY POSITIVE)1
8C***56CABLE (2-GA, RED)(210-CM)
8T***46TUBE-HEAT SHRINK (19.1-MM DIA)(23-CM)
03***11TERMINAL-RING (2-GA, 5/16-IN SCREW)1
03***12TERMINAL-RING (2-GA, 1/4-IN SCREW)(CIRCUIT BREAKER)1
9312***62CABLE AS (ALTERNATOR GROUND)1
3L***13TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)1
8C***96CABLE (2-GA)(141-CM)
8T***46TUBE-HEAT SHRINK (19.1-MM DIA)(23-CM)
03***12TERMINAL-RING (2-GA, 1/4-IN SCREW)(CIRCUIT BREAKER)1
947K***81STRAP-PRESSURE & RETURN HOSES TO 1
959G***50CLIP-TO ENGINE COOLANT SWITCH MOUNTING 1
9611***33SWITCH AS-PRESSURE (A/C)1
10***02KIT-RECEPTACLE (2-PIN)(ENGINE SENSOR WIRING HARNESS)1
(INCLUDES RECEPTACLE AS & WEDGE)
3E***65WEDGE (RECEPTACLE LOCK) (2 PIN)1
8T***29PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR)2
979X***78SEAL-O-RING (8.92MM ID) 1
984K***64CLIP-- LOCK LINE TO HITCH (14.2MM ID)(CIRCULAR)1
994D***17CLIP 4
1009M***06CLIP-TO 8X7433 HARNESS AS ON FORE-AFT 1
1017X***18BOLT-PLT (M8 X 1.25 X 45)1
1026V***14BOLT (20mm LONG) (M6X1X20-MM)1
1034E***18WIRE AS 1
1046V***88NUT-FULL (1/2-13 THD) (1/2-13-THD)(FULL)1
1055P***70NUT-HARD (M8 X 1.25)1
1064E***89CABLE AS 1
5P***44CABLE (00-GA, BLACK)
5P***00TERMINAL-RING (FOR 1/2" FASTENER)2
1078T***91BOLT-PLT (M10 X 1.5 X 16)1
8T***21WASHER-HARD (11X21X2.5-MM THK)(M10X1.50X30MM)1
1085P***85CLIP (7.94MM ID)1
1098T***79BOLT (M12X1.75X20MM)(TO TURBOCHARDER-MOUNTING FACE)2
1105P***16WASHER (HARD) (8.8X20.5X2mm THK)2
1114P***20SENSOR GROUP-SPEED (ENG SPEED PICK-UP)1
10***02KIT-RECEPTACLE (2-PIN)(ENGINE SENSOR WIRING HARNESS)1
(INCLUDES RECEPTACLE AS & WEDGE)
3E***65WEDGE (RECEPTACLE LOCK) (2 PIN)1
8T***29PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR)2
9X***86SLEEVE (BULK) (15 CM)
1128M***73CLIP (17.46MM ID)(HOSE AS TO MAG DRIVE HOUSING)2
1137N***18CLIP (UNDER HYDRAULIC TANK) 2
USE AS REQUIRED
CHANGE FROM PREVIOUS TYPE
ORDER BY THE METER
ORDER BY THE CENTIMETER
METRIC PART
SEPARATE ILLUSTRATION

1255482 WIRING GROUP-MACHINE - CHALLENGER Caterpillar 75D - Challenger 75D Agricultural Tractor 5AR00001-UP (MACHINE) POWERED BY 3176C Engine ELECTRICAL AND STARTING SYSTEM | 777parts

Related parts

Spare parts dealers for Caterpillar

  • US Axis Parts, LLC
  • US Red Rock Trucking Inc
  • US High Tech Industries
  • US Frontier Tractor
  • US W.R. Murdock & Sons, Inc.
  • US MILLS EQUIPMENT LLC
  • US M T Machinery Inc.
  • US Radiator Supply House
  • US Utah Track & Welding
  • US Active Radiator
  • US Transaxle
  • US SHP Hydraulic Pump Service

Add your company

* To view Caterpillar spare parts dealers contact information you must be registered and logged in.